Adsorption dryer is a kind of equipment that uses activated carbon and other adsorbents to desorbed moisture in the air。When the moisture in the air is absorbed by the adsorbent to a certain extent, desorption occurs and heat is released。This process is the heating process of the adsorption dryer, which can improve the activity of the adsorbent by heating, thus improving the dehumidification effect。

Temperature control of adsorption dryer in summer:

The temperature control of adsorption dryers in summer mainly depends on two factors: one is the ambient temperature, and the other is the type of adsorbent。In general, the ambient temperature in summer is higher, so the operating temperature of the adsorption dryer will also increase accordingly。In order to ensure the normal operation and service life of the equipment, it is generally recommended to control the operating temperature of the adsorption dryer at about 40°C。Of course, the specific temperature control also needs to be adjusted according to the performance of the adsorbent and the actual situation。

How to properly operate the adsorption dryer:

1、 Choose the right moisture absorbent: Different types of moisture absorbent are suitable for different environmental conditions。In the purchase of adsorption dryer, should be according to their own needs to choose the appropriate moisture absorption agent。At the same time, pay attention to the regular replacement of moisture absorbent to ensure its good dehumidification effect。

2, a reasonable set of running time: long-term operation of adsorption drying will increase the energy consumption of the equipment, affecting the service life。Therefore, it is recommended to set the running time reasonably to avoid unnecessary waste。

3、 Pay attention to ventilation and heat dissipation: The adsorption dryer will generate a certain amount of heat during operation. If the ventilation is poor, the normal operation of the device will be affected。Therefore, make sure that there is enough space around the equipment for ventilation and heat dissipation。

Recommended articles:Standard analysis of adsorbent for adsorption dryer》、《What are the types of adsorbents for the adsorption dryer？》、《How often does the adsorbent of the adsorption dryer change？》